The ADE30f is our 30mm flakes extruder. The ADE30f is an extruder that has been designed to be able to print flakes instead of the normal pellets/granules. This means that it can directly print with shredded plastics which gives it a whole other range of possibilities. For example, starting a completely recycled and circular process …
We provide a variety of printbeds for our various additive manufacturing machines. Our main options are the PBh and PBm. The PBh is a horizontal stationary printbed that can be mounted on the floor next to one of our machines and is always installed in our AR system mobile. It has a replaceable top-layer for …
Most additive manufacturing machines either use a gantry type system or a robotic arm. Both have their own advantages over the other. For example, a gantry can be made bigger, and a robot arm can print on more axes. What if you would combine these two 3d printing methods and attach the robot arm to …
All over the world, huge amounts of PET bottles are discarded after single use. Not only is this unsustainable, it also wastes material value. PET is a widely applicable material and easily recyclable. PET is also very suitable for 3D printing large scale products. At BLOOM, we have developed and built a complete production line …
Mass production has been automated for many years but now a big change is happening. The machines that are used for mass production today are fast but very hard to change. It can get very expensive and time consuming to even slightly change a product that is being mass produced. This can be avoided by …
The ADE25 is our 25mm extruder. It has been made to be used on a robotic arm, but we can modify it for use on other types of additive manufacturing machines. This extruder comes in two different models the ADE25 and the ADE25h. The difference is that the h variant is horizontally mounted next to …